EVO I, II Firmware Update

To keep your EVO I or II system optimized to perform at its highest level, you must upgrade your system to the most recent firmware/software version. 

The latest EVO I and II update [Version 2.0.1.55] includes research and development changes as well as customer requested enhancements from previous firmware releases. 

Download firmware update for EVO I or II here:  [Version 2.0.1.55]

 If you are looking for firmware updates for the EVO III, go here.

1. Load the upgrade file on a thumb drive [USB memory stick] and insert into the lower EVO USB slot.

2. Hold the power button while powering on your EVO portable ultrasound system—release the power button when the keyboard starts blinking.

3. Allow the scanner to boot and follow the on-screen prompts.

Once the system has rebooted, we recommend you reset the EVO to factory default settings. This will refresh all of the probe exam types to new settings to provide the best possible image quality.

1. Press SUPER from the HOME menu.

2. Press F2 [SETUP]

3. Press F4 [SYSTEM]

4. Press F2 [RESET]

5. Choose RESET ALL option

6. Confirm by selecting YES at the prompt

If you would like to receive further instructions or assistance, we have a customer service representative waiting to assist you during our business hours [see sidebar].  

Email

info@eimedical.com

Telephone

toll free: 866.365.6596
phone: 970.669.1793
fax: 970.669.1902

Address

E.I. Medical Imaging
815 14th St SW, Unit 102
Loveland, CO 80537-6396